smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.14.2-1-liquorix-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST750LM022 HN-M750MBB Serial Number: S330J9CF406840 LU WWN Device Id: 5 0004cf 20ce5243d Firmware Version: 2BA30001 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 28 18:46:06 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 9900) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 165) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 13877 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 087 025 - 2531 4 Start_Stop_Count -O--CK 091 091 000 - 9285 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 22430 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 092 092 000 - 8820 191 G-Sense_Error_Rate -O---K 100 100 000 - 2426 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 051 000 - 29 (Min/Max 12/50) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 098 098 000 - 325 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 159214 223 Load_Retry_Count -O--CK 086 086 000 - 14620 225 Load_Cycle_Count -O--CK 085 085 000 - 154405 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 13005 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 13005 [4] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 28 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 50 00 00 03 ee e2 90 40 00 00:00:00.940 READ FPDMA QUEUED 61 00 00 00 08 00 00 02 39 e3 98 40 00 00:00:01.120 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 60 f7 30 40 00 00:00:01.120 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 00 44 40 2a 40 00 00:00:01.120 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 62 ff 68 40 00 00:00:01.120 WRITE FPDMA QUEUED Error 13004 [3] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 19 bd 42 40 00 00:00:01.063 READ FPDMA QUEUED 60 00 00 00 08 00 00 03 ee e2 b8 40 00 00:00:00.881 READ FPDMA QUEUED 60 00 00 00 08 00 00 03 ee e2 b8 40 00 00:00:01.060 READ FPDMA QUEUED 60 00 00 00 20 00 00 00 44 6f 8b 40 00 00:00:01.060 READ FPDMA QUEUED 60 00 00 00 20 00 00 0a 4a d1 5b 40 00 00:00:01.060 READ FPDMA QUEUED Error 13003 [2] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 28 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 54 00 00 00 04 c9 e3 40 00 00:00:01.003 READ FPDMA QUEUED 60 00 00 00 50 00 00 03 ee e2 90 40 00 00:00:00.881 READ FPDMA QUEUED 61 00 00 00 10 00 00 00 61 30 b0 40 00 00:00:01.000 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 00 51 6d b2 40 00 00:00:01.000 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 62 fb a0 40 00 00:00:01.000 WRITE FPDMA QUEUED Error 13002 [1] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 28 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 40 00 00 00 44 3c 5a 40 00 00:00:00.943 READ FPDMA QUEUED 60 00 00 00 50 00 00 03 ee e2 90 40 00 00:00:00.875 READ FPDMA QUEUED 60 00 00 00 08 00 00 03 19 f3 48 40 00 00:00:00.940 READ FPDMA QUEUED 60 00 00 00 20 00 00 0a 4a d1 1b 40 00 00:00:00.940 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 66 b1 f0 40 00 00:00:00.940 READ FPDMA QUEUED Error 13001 [0] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 28 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 03 ee e2 90 40 00 00:00:00.883 READ FPDMA QUEUED 60 00 00 00 50 00 00 03 ee e2 90 40 00 00:00:00.875 READ FPDMA QUEUED 60 00 00 00 04 00 00 00 13 61 bc 40 00 00:00:00.881 READ FPDMA QUEUED 60 00 00 00 40 00 00 00 51 6a ea 40 00 00:00:00.881 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 51 6a 5a 40 00 00:00:00.881 READ FPDMA QUEUED Error 13000 [7] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 28 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 58 00 00 03 ee e2 88 40 00 00:00:00.875 READ FPDMA QUEUED 61 00 00 00 10 00 00 00 04 18 f8 40 00 00:00:00.878 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 00 10 df fa 40 00 00:00:00.878 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 04 1f e8 40 00 00:00:00.878 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 00 51 6a aa 40 00 00:00:00.878 READ FPDMA QUEUED Error 12999 [6] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 28 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 60 00 00 03 ee e2 80 40 00 00:00:00.873 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 04 1f e8 40 00 00:00:00.875 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 65 bc e8 40 00 00:00:00.875 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 60 f7 40 40 00 00:00:00.875 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 61 30 88 40 00 00:00:00.875 WRITE FPDMA QUEUED Error 12998 [5] occurred at disk power-on lifetime: 20842 hours (868 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 28 00 00 03 ee e2 b8 40 00 Error: UNC at LBA = 0x03eee2b8 = 65987256 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 68 00 00 03 ee e2 78 40 00 00:00:00.867 READ FPDMA QUEUED 60 00 00 00 08 00 00 05 5e 90 b0 40 00 00:00:00.873 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 04 19 00 40 00 00:00:00.873 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 04 1f e8 40 00 00:00:00.873 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 07 0c c0 40 00 00:00:00.873 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 21504 - # 2 Short offline Aborted by host 90% 21504 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Aborted_by_host [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 29/29 Celsius Lifetime Min/Max Temperature: 11/49 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (1) Index Estimated Time Temperature Celsius 2 2025-10-28 08:10 29 ********** 3 2025-10-28 08:15 33 ************** 4 2025-10-28 08:20 34 *************** ... ..( 4 skipped). .. *************** 9 2025-10-28 08:45 34 *************** 10 2025-10-28 08:50 26 ******* 11 2025-10-28 08:55 27 ******** 12 2025-10-28 09:00 28 ********* 13 2025-10-28 09:05 29 ********** 14 2025-10-28 09:10 30 *********** 15 2025-10-28 09:15 24 ***** 16 2025-10-28 09:20 28 ********* 17 2025-10-28 09:25 30 *********** 18 2025-10-28 09:30 31 ************ 19 2025-10-28 09:35 33 ************** 20 2025-10-28 09:40 34 *************** 21 2025-10-28 09:45 35 **************** 22 2025-10-28 09:50 36 ***************** 23 2025-10-28 09:55 36 ***************** 24 2025-10-28 10:00 36 ***************** 25 2025-10-28 10:05 37 ****************** 26 2025-10-28 10:10 27 ******** 27 2025-10-28 10:15 31 ************ 28 2025-10-28 10:20 32 ************* 29 2025-10-28 10:25 32 ************* 30 2025-10-28 10:30 33 ************** 31 2025-10-28 10:35 28 ********* 32 2025-10-28 10:40 31 ************ 33 2025-10-28 10:45 32 ************* 34 2025-10-28 10:50 33 ************** 35 2025-10-28 10:55 33 ************** 36 2025-10-28 11:00 27 ******** 37 2025-10-28 11:05 28 ********* 38 2025-10-28 11:10 30 *********** 39 2025-10-28 11:15 31 ************ 40 2025-10-28 11:20 31 ************ 41 2025-10-28 11:25 26 ******* 42 2025-10-28 11:30 29 ********** 43 2025-10-28 11:35 30 *********** 44 2025-10-28 11:40 31 ************ ... ..( 2 skipped). .. ************ 47 2025-10-28 11:55 31 ************ 48 2025-10-28 12:00 32 ************* ... ..( 2 skipped). .. ************* 51 2025-10-28 12:15 32 ************* 52 2025-10-28 12:20 25 ****** 53 2025-10-28 12:25 26 ******* 54 2025-10-28 12:30 28 ********* 55 2025-10-28 12:35 29 ********** 56 2025-10-28 12:40 29 ********** 57 2025-10-28 12:45 32 ************* 58 2025-10-28 12:50 33 ************** 59 2025-10-28 12:55 32 ************* 60 2025-10-28 13:00 32 ************* 61 2025-10-28 13:05 31 ************ 62 2025-10-28 13:10 31 ************ 63 2025-10-28 13:15 24 ***** 64 2025-10-28 13:20 27 ******** 65 2025-10-28 13:25 30 *********** 66 2025-10-28 13:30 31 ************ ... ..( 4 skipped). .. ************ 71 2025-10-28 13:55 31 ************ 72 2025-10-28 14:00 32 ************* 73 2025-10-28 14:05 32 ************* 74 2025-10-28 14:10 33 ************** 75 2025-10-28 14:15 33 ************** 76 2025-10-28 14:20 33 ************** 77 2025-10-28 14:25 34 *************** ... ..( 5 skipped). .. *************** 83 2025-10-28 14:55 34 *************** 84 2025-10-28 15:00 35 **************** ... ..( 11 skipped). .. **************** 96 2025-10-28 16:00 35 **************** 97 2025-10-28 16:05 36 ***************** 98 2025-10-28 16:10 25 ****** 99 2025-10-28 16:15 28 ********* 100 2025-10-28 16:20 31 ************ 101 2025-10-28 16:25 32 ************* ... ..( 2 skipped). .. ************* 104 2025-10-28 16:40 32 ************* 105 2025-10-28 16:45 31 ************ 106 2025-10-28 16:50 32 ************* 107 2025-10-28 16:55 32 ************* 108 2025-10-28 17:00 32 ************* 109 2025-10-28 17:05 28 ********* 110 2025-10-28 17:10 29 ********** 111 2025-10-28 17:15 31 ************ 112 2025-10-28 17:20 31 ************ 113 2025-10-28 17:25 31 ************ 114 2025-10-28 17:30 27 ******** 115 2025-10-28 17:35 30 *********** 116 2025-10-28 17:40 31 ************ 117 2025-10-28 17:45 32 ************* 118 2025-10-28 17:50 32 ************* 119 2025-10-28 17:55 24 ***** 120 2025-10-28 18:00 26 ******* 121 2025-10-28 18:05 27 ******** 122 2025-10-28 18:10 28 ********* 123 2025-10-28 18:15 28 ********* 124 2025-10-28 18:20 29 ********** 125 2025-10-28 18:25 29 ********** 126 2025-10-28 18:30 30 *********** ... ..( 2 skipped). .. *********** 1 2025-10-28 18:45 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific