smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.4.0-3-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-00SCST0
Serial Number: WD-WXU1C6023804
LU WWN Device Id: 5 0014ee 2af9bfe30
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri May 8 22:02:17 2020 MSK
SMART support is: Available — device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 118) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 — 0
3 Spin_Up_Time POS—K 170 158 021 — 2491
4 Start_Stop_Count -O—CK 088 088 000 — 12434
5 Reallocated_Sector_Ct PO—CK 200 200 140 — 0
7 Seek_Error_Rate -OSR-K 200 200 000 — 0
9 Power_On_Hours -O—CK 045 045 000 — 40800
10 Spin_Retry_Count -O—CK 100 100 000 — 0
11 Calibration_Retry_Count -O—CK 100 100 000 — 0
12 Power_Cycle_Count -O—CK 099 099 000 — 1724
192 Power-Off_Retract_Count -O—CK 200 200 000 — 43
193 Load_Cycle_Count -O—CK 182 182 000 — 56207
194 Temperature_Celsius -O—K 111 092 000 — 36
196 Reallocated_Event_Count -O—CK 200 200 000 — 0
197 Current_Pending_Sector -O—CK 200 200 000 — 0
198 Offline_Uncorrectable —-CK 100 253 000 — 0
199 UDMA_CRC_Error_Count -O—CK 200 200 000 — 5
200 Multi_Zone_Error_Rate —R— 200 200 000 — 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 40800 —
# 2 Short offline Completed without error 00% 40797 —
# 3 Conveyance offline Completed without error 00% 40797 —
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 24/38 Celsius
Lifetime Min/Max Temperature: 24/55 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (32)
Index Estimated Time Temperature Celsius
33 2020-05-08 19:55 27 ********
… ..( 23 skipped). .. ********
57 2020-05-08 20:19 27 ********
58 2020-05-08 20:20 28 *********
59 2020-05-08 20:21 30 ***********
60 2020-05-08 20:22 30 ***********
61 2020-05-08 20:23 31 ************
62 2020-05-08 20:24 32 *************
63 2020-05-08 20:25 33 **************
64 2020-05-08 20:26 34 ***************
65 2020-05-08 20:27 34 ***************
66 2020-05-08 20:28 35 ****************
… ..( 3 skipped). .. ****************
70 2020-05-08 20:32 35 ****************
71 2020-05-08 20:33 36 *****************
… ..( 2 skipped). .. *****************
74 2020-05-08 20:36 36 *****************
75 2020-05-08 20:37 37 ******************
… ..( 3 skipped). .. ******************
79 2020-05-08 20:41 37 ******************
80 2020-05-08 20:42 38 *******************
… ..( 38 skipped). .. *******************
119 2020-05-08 21:21 38 *******************
120 2020-05-08 21:22 37 ******************
121 2020-05-08 21:23 37 ******************
122 2020-05-08 21:24 37 ******************
123 2020-05-08 21:25 38 *******************
124 2020-05-08 21:26 37 ******************
… ..( 35 skipped). .. ******************
32 2020-05-08 22:02 37 ******************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 10983 Vendor specific